High Accuracy Co-Ordinate CMM Measuring Machines
|Product name:||Coordinate Measuring Machine|
|Model Number:||ASIDA 6050A,ASIDA8060A,ASIDA120100A,ASIDA 220180|
|Place of Origin:||China|
|Packaging Details:||Wooden Carton|
CMM Measuring Machines Usage
CMM Measuring Machines is a device for measuring the physical geometrical characteristics of an object. Applicable to two-dimensional measuring instruments mainly include points, lines,
circles, rectangles and other geometric elements and zeropieces of length, angle,
contour, shape, surface shape, increasing three-dimensional measuring probe can be realizde.
CMM Measuring Machines Advantage
The precision and accuracy given by a CMM is very high. It is because of the inherent characteristics of the measuring techniques used in CMM. Following are the main advantages that CMM can offer :
CMMs are essentially universal measuring machines and need not be dedicated to any particular task. They can measure almost any dimensional characteristic of a part configuration, including cams, gears and warped surfaces. No special fixtures or gages are required. Because probe contact is light, most parts can be inspected without being clamped to the table.
(2)Reduced Setup Time
Part alignment and establishing appropriate reference points are very time consuming with conventional surface plate inspection techniques. Software allows the operator to define the orientation of the part on the CMM, and all subsequent data are corrected for misalignment between the parts-reference system and the machine coordinates.
Most parts can be inspected in a single setup, thus eliminating the need to reorient the parts for access to all features.
All measurements in a CMM are taken from a common geometrically fixed measuring system, eliminating the introduction and the accumulation of errors that can result with hand-gage inspection methods and transfer techniques.
(5)Reduced Operator Influence
The use of digital readouts eliminate the subjective interpretation of readings common with dial or vernier type measuring devices. Operator “feel” is virtually eliminated with modern touch-trigger probe systems, and most CMMs have routine measuring procedures for typical part features, such as bores or centre distances. In computer assisted systems; the operator is under the control of a program that eliminates operator choice. In addition, automatic data recording, available on most machines, prevents errors in transcribing readings to the inspection report. This adds upto the fact that less skilled operators can be easily instructed to perform relatively complex inspection procedures. 104 Metrology and Instrumentation.
The above-mentioned advantages help make CMMs more productive than conventional inspection techniques. Furthermore, productivity is realized through the computational and analytical capabilities of associated data-handling systems, including calculators and all levels of computers.
CMM Measuring Machines Characteristics
1. Used of natural granite base and column sitting, strong stability, high hardmess. Not easy to
deformation; Piece length, angle, contour, shape, surface shape, increasing three-dimensional measuring probe can realized;
2. X, Y to the use of air bearings, granite-oriented, can work long hours to ensure the accuracy and stability of mechanical systems.
3. The German edentulous screw and ball screw drive are used on machine drivers;
4. Ring LED cold light source, long life, will not produce thermal deformation measurement;
5. Optical system quality, bright and clear images, image reduction is good;
6. Three -axis servo motor drive with Panasonic.
CMM Measuring Machines Technical Parameters
|X.Y.Z Stroke||600×500×200 mm||800×600×200mm||1200×1000×200mm||2200×1800×200mm|
|Loader Size||650×550mm||750×650 mm||850×750mm||860×660 mm|
|Base Materials||00 Granite|
|Objective Lens Focal||90mm|
|Total Max Magnification||25X~180X|
|XY Linear Accuracy||≤(2.5+L/200)um||≤(3+L/200)um|
|Total Machine Size(mm)||1850×1960×1800||1950×2060×1800||2500×1800×1800||3550×3000×1900|
|Total Machine Weight||1800Kg||2000Kg||3800Kg||7500 Kg|
|Measuring Software||ASIDA MEASURE VMA 3.00.01(language CHS, CHT, English)|
|Data Output Format||DXFEXCELWORD|
|OS||Windows XP Pro WIN7|
|PC(PC Requirement)||CPU:(Dul Core),≥2G(Memory),≥320G(Hard Disk)|
|Optional Accessories||NAVITAR(USA NAVITAR Lens System);Renishaw|
(UK Renishaw Probe System);(Japan Keyence Laser Sensor System)
|Remark||(The stroke of machine can be customized depending customer requirements)|